
S-1 _MANOEUVRE ORIENTED WAVE
MAXIMUM MANEUVERABILITY. MAXIMUM PERFORMANCE.
The S-1 is a high performance 4 batten wave sail. Lightweight, flexible, and instantly responsive; a spring loaded and ready to release on demand.
The 027 is a complete redesign across all sizes. DirectConnect now extends to an internal luff panel connecting tack and head: a CarbonFusion strip from the pulley to the top of the sail, carrying the primary loads through the structure. That frees the sail body to inflate faster and react quicker, with stretch under control. It sits more neutral as a result; less locked, more alive in the hands. Swing weight has been reduced further through optimised head and clew construction. Wind range is up across the board. A split sleeve makes mast insertion faster and rigging simpler.
One of the first things riders notice about the S-1 is that it feels light. It is light. But the balance and short boom geometry make it feel lighter still. D6 Dacron adds elasticity to the forward sections; VX2 stabilises the body panels. The result is a consistent power position between the hands; enough back-hand pressure to perform, never enough to fatigue.
The 027 S-1 is a manoeuvre-oriented wave sail to excel in waves from knee high to as big as they go.
/ 4 BATTEN DESIGN
/ X-PLY OR CARBONFUSION WITH MONO WINDOW
/ DIRECTCONNECT INTERNAL LUFF PANEL
/ SPLIT SLEEVE
/ DEVELOPED WITH JAEGER STONE
SIZES: 3.3 / 3.6 / 4.0 / 4.4 / 4.8 / 5.0 / 5.2 / 5.6
| 027 S-1 | Luff | Boom | Battens | Weight | Head | Mast | Enigma Boom | Boom | Extension |
|---|---|---|---|---|---|---|---|---|---|
| 3.3 | 340+4 (ADJ-HEAD 5) | 142 | 4 | 2.4 | ADJ | RDM BLUE 340 | Enigma 140 | METAL 140 | Cyclops 24 |
| 3.6 | 340+8 | 148 | 4 | 2.43 | FIXED | RDM BLUE 340 | Enigma 140 | METAL 140 | Cyclops 24 |
| 4.0 | 340+29 | 152 | 4 | 2.62 | FIXED | RDM BLUE 340 | Enigma 140 | METAL 140 | Cyclops 36 |
| 4.4 | 370+12 | 156 | 4 | 2.73 | FIXED | RDM RED 370 | Enigma 140 | METAL 140 | Cyclops 24 |
| 4.8 | 400+4 | 158 | 4 | 2.8 | FIXED | RDM RED 390 (ideal) / 400 | Enigma 140 | METAL 140 | Cyclops 24 |
| 5.0 | 400+15 | 160 | 4 | 2.96 | FIXED | RDM RED 400 | Enigma 140 | METAL 140 | Cyclops 24 |
| 5.2 | 400+20 | 161 | 4 | 3.02 | FIXED | RDM RED 400 / 410 | Enigma 140 | METAL 140 | Cyclops 24 |
| 5.6 | 400+30 | 167 | 4 | 3.19 | FIXED | RDM RED 400 / 410 | Enigma 150 | METAL 150 | Cyclops 36 |
“The S-1 has gone through major changes over the last 20 odd years.
It was one of the original sails that SEVERNE designed and is
incredibly supportive of the way that I want to windsurf and wave sail.“

S-1 TECHNOLOGY OVERVIEW
SEVERNE continues to lead the way in windsurf sail construction. CarbonFusion welded foot panels and carbon load transfer strips, once reserved for the PRO models, are now standard on the S-1.
For 027 the S-1 is a complete redesign across all sizes. DirectConnect extends to an internal luff panel from the pulley to the head, and a split sleeve simplifies rigging. Optimised head and clew construction cuts swing weight further. Here’s the full rundown of the tech that makes up the 027
TECHNOLOGY


VX2
VERTICAL XPLY 2.0MIL.
/ MATERIAL
VX2 is a vertically oriented X-Ply featuring increased fibre density for stability and control, reduced film thickness for less weight, and our proven scrim layer for dependable durability. The 2 signifies the film thickness in mil.
/ ADVANTAGES.
VX2 laminate significantly reduces deformation in the sail compared to eM3 material. The vertical stretch has been reduced by more than 20% whilst the horizontal stretch characteristics have increased fractionally to enhance the elastic springy feel that has defined the SV wave sails.
MORE STABLE.
MORE DURABLE.
LESS WEIGHT.


GRADIENT PANEL TECHNOLOGY
The GRADIENT PANEL TECHNOLOGY logically reduces weight, increases strength and controls stretch. Overall weight is reduced but the more significant improvement is the feel – quicker reacting and lighter feel.
Rather than a single curved luff panel, the S-1 uses separate panels that radiate out of the head and tack corners. This perfectly aligns the sail material with the direction of load. Previously the curved panel would have bias stretch in all the wrong places. Direct transmission of power. Increased longevity.


THERMOFORMED CAMO TACK FAIRING
Protects your board from impact and neatly covers the foot detailing. It incorporates the rope stash pocket for easy storage of your downhaul rope.


MOLDED SOFT EDGE
With recessed grooving, covering any vulnerable stitching the moulded soft edge encloses the hard edge long the foot of the sail and protects the stitching from wear along the board non-skid.


SPIDERFIBRE
A web of fibreglass filament that disburses loads across seams and throughout the body of the sail. By using stronger, lighter fibres and reducing sail patching, we can measurably reduce weight and swing weigh and at the same time, increase strength.


EM4 HIGH LOAD LAMINATE
Based on the proven eM3 platform, the high load eM4 material features twice the amount of X-Ply fibre and increased film thickness to maximise durability. This new material allows weight reduction whilst maintaining puncture resistance and tear strength. Used in the lower impact zone in the sail.


DIRECTCONNECT INTERNAL LUFF PANEL
DirectConnect is a system of directly connecting the sail to any hardware; mast, battens. Carbon Fibre load transfer strips sit in the high-load head and tack areas, and High-Tensile webbing attaches the tack pulley, clew ring and mast tip. For 027 it extends to an internal luff panel from the pulley to the top of the sail. That panel carries the primary loads through the structure; the sail body is free to inflate faster and react quicker.

D6 DACRON
High performance Dacron used in the luff panel and batten pockets. Low stretch makes D6 more responsive, and gives it better long-term shape retention. Features a tight ripstop mesh and is highly durable.

CARBONFUSION TECHNOLOGY
The technology usually reserved for the PRO models has now trickled down into the standard Blade and S-1 models, with stitch-less welded foot panels and carbon load transfer strips.
GRADIENT PANEL TECHNOLOGY
With the new GRADIENT PANEL TECHNOLOGY improvements are obvious. Lighter weight and better stability.
Using the new GRADIENT PANEL TECHNOLOGY. Corners have overlapped panels which reduces the amount of patching. At the same time these overlapped areas extend into the body of the sail so it transitions the load much better, will be less stretch over time. It’s a more stable way of building sails.
The GRADIENT PANEL TECHNOLOGY logically reduces weight, increases strength and controls stretch. Overall weight is reduced but the more significant improvement is the feel – quicker reacting and lighter feel.
Rather than a single curved luff panel, we use separate panels – split luff – that radiate out of the head and tack corners. This perfectly aligns the sail material with the direction of load.
Previously the curved panel would have bias stretch in all the wrong places. Direct transmission of power. Increased longevity.

RECOMMENDED
/ BOARD
PYRO
STONE
NANO
DYNO
/ MAST
RDM RED – For ultimate performance.
RDM BLUE – High-end performance with increased reliability.
3.3, 3.6 and 4.0: RDM BLUE 340. 4.4 and up: RDM RED.
S-1 is recommended for RDM masts.
/ BOOM
ENIGMA – For ultimate performance.
METAL – For high-end performance.
/ EXTENSION
CYCLOPS
COMPARISON
/ BLADE
The S-1 has 4 battens.
The S-1 has a shorter boom.
The S-1 has more back-hand pressure.
The S-1 inflates and accelerates quicker.
The S-1 is more manoeuvrable.
The S-1 generates instant power.
/ S-1 PRO
The S-1 is less expensive.
The S-1 PRO is lighter, more stable and more responsive.
/ BLADE PRO
The S-1 has 4 battens.
The S-1 is more manoeuvre oriented.
The S-1 has more back-hand pressure.
What is new on the 027 S-1?
The 027 S-1 is a complete redesign across all sizes. DirectConnect now extends to an internal luff panel connecting tack and head: a CarbonFusion strip from the pulley to the top of the sail that carries the primary loads through the structure. The sail body inflates faster and reacts quicker, with controlled stretch, and sits more neutral in the hands. A split sleeve makes mast insertion faster and rigging simpler. Swing weight is reduced further through optimised head and clew construction, and wind range is up across the board. 8 sizes, 3.3 to 5.6.





